Sir Walter Raleigh used the term "gansey knit" in a letter to a Polish Princess to refer to finely knit hose. Gladys Thompson used it to refer to an object knit from ~2,500 ypp yarn, knit at a gauge of 12 spi and 20 rpi, which she also refers to as "Jersey". Thus, we know the term is old, and the modern knitting of 80 stitches per square inch barely scratches the surface of what traditional knitters could knit.
These two references have been rattling around in my brain since I first started experimenting with "gansey needles" (and knitting sheaths). However, then, I was never able to knit such fabric at a reasonable pace. Now, that I have been using blunt gansey needles, such fabrics and objects have become more practical.
For example, when I first came across Jamiesons 2-ply Shetland Spindrift yarns (2,200 ypp), I was rather disdainful of the fabrics produced according to the gauge on the yarn band. However, when knit on 1.5 mm needles, the fabric is lovely. Gauge runs ~ 160 stitches per square inch. Not "weatherproof" mind you, but a warm, elastic fabric that is perfect for wearing in cool damp conditions. .Spindrift knit on 1.5 mm needles is warmer than worsted weight yarn (e.g., "4") knit on 5 mm or US 8 needles. The Paton's 4-ply Beehive was just a bit denser than the Spindrift with a slightly lower grist, and when knit on similar needles, produces a denser, warmer, and more durable fabric at 12 spi and 20 rpi,
These days I have taken to knitting yarns with grists of ~1,650 ypp/ 3.3 Nm (e.g. 3-ply or 6-ply sock yarns) on needles in the 1.75 mm range. This is finer than previous posts, and results in a gauge of 12 spi by 15 rpi. (As I said, I am falling down the Rabbit Hole and in the last few weeks, I have ground the sharp points off of 6 or 8 sets of fine, pointy "gansey needles"!) I use these fabrics for socks, mittens, and where ever a warm, light weight fabric is required. The more plies, the better the drape and elasticity of the fabric.
Then, 4-ply yarns in the 1,260 ypp range are knit on 2.0 mm needles. A month ago, I was knitting 1650 ypp yarns on 2 mm needles.
5-ply (gansey) yarns in the 1,000 ypp (sport weight) are still knit on 2.38 mm needles. It is a nice fabric. If I need a more weatherproof fabric, I reduce the ply twist to give more fill and knit on smaller needles. If I need a much warmer fabric, I use a lower grist yarn.
All of the above fabrics are firm, warm fabrics with good drape and excellent durability. For all of the above fabrics, I use long steel DPN with a knitting sheath. as described above, none of the fabrics are particularly weatherproof. Production rates on the finer needles are much better using blunt needles and working in the round. Purl stitches are easier on pointed needles. Pointed needles are required for picking up stitches. A fine crochet hook makes repair of mistakes easier. A cable needle is required for cable stitches.
So the question is,"Do I want an object that will be warm and stay looking beautiful for years and years, or do I want an object that will never be very warm, and will quickly fall apart?"
I work in yards per pound (ypp), because the math is easy. The square of the wpi (packed to refusal) is the grist in ypp, always. I know that when 10 hanks of 560 yards weigh a pound, I have spun 10s or 5,600 ypp, and it will measure 75 wpi. Then, if I make 5-ply, it will have a grist of 1,000 ypp and measure 32 wpi. I know that if I spin a single that measures 105 wpi, and I make 6-ply, then the resulting sock yarn will measure 40 wpi. I know that if I spin 40s that measure 150 wpi, and I ply it into a 6-ply yarn, it will have a grist of 3,360 ypp and measure 58 wpi.
Thus, I must update my gansey yarn chart.
(Note the differences with http://www.craftyarncouncil.com/weight.html , and https://en.wikipedia.org/wiki/Yarn_weight. Also note the failure of http://www.knitting-naturally.com/yarn-comparison-chart.html, http://www.spinderellas.com/Yarn%20Weights%20and%20Measures.pdf , and http://paternoster.orpheusweb.co.uk/lace/knittingyarns.htm , to use a wraps per inch technique that provides consistent and useful results.) The knitting community's to failure to "pack to refusal" when measuring wpi results in nonsense.
wpi grist (ypp) spin count notes
22 484 Aran Yarn (traditionally was 10-ply of 10 count singles)
24 1
26 676
28 840 Worsted Yarn (traditionally was 6-ply of 10 count singles)
30 900
32 1,000 Gansey Yarn ( 5-ply of 10 count singles)
33 1,100 DK weight yarns
34 1,120 2
38 1,443 Common grist for commercial sock yarns e.g., Wooly West
40 1,650 3 Various 3-ply and 6-strand yarns knit on 1.75 mm gansey needles.
42 1,800 Single cut woolen singles
44 1935 Fingering Yarn
48 2,303 Jumper Weight/ Spindrift weight 2-ply (1.5 mm needles)
50 2,520 4-ply Beehive yarn ( 20 count singles) (1.65 mm needles)
53 2,800 5
58 3,360 Traditional 6-ply sock yarn from 40 count singles
60 3,600 2-cut woolen singles @ 9 tpi
64 4,100 Modern lace weight
70 4,800 Woolen single at same tpi as 10s warp
75 5,600 10s Singles for warp/ 9-10 tpi ; woolen singles for weft @ 12 tpi
82 6,700 13 Traditional 3-ply Shetland lace plied up from 40 count singles
85 7,200 High-end Shetland lace weight yarn/ 2/14.5 Nm
105 11,200 20s Worsted singles that I use for my sock yarn @ 14 tpi
120 14,400 8- cut woolen singles / 18 tpi
130 16,800 30s Worsted singles @ 17 tpi
136 18,000 10-cut woolen singles / 20 tpi
142 20,200 2-ply from 80s e.g., ~2/40 Nm
150 22,400 40s Singles used for best sock yarn/ 17 -22 tpi /~ 45 Nm /Shirting
182 33,600 60s Traditional commercial "fines" / 22- 24 tpi
210 44,800 80s Traditional best commercial "fines" /24 - 27 tpi / 90 Nm
So, when I measure the wpi of 2/40 Nm yarn I get ~135 wpi which converts to ~ 18,000 ypp, which is about what I get when I simply convert from metric units. Wraps per inch works when one packs to refusal. For somebody to say a 2/40 Nm yarn measures 42 wpi is silly. If any of the sites referenced above had a competent spinner in residence, they would know this.
Note that 2/40 Nm can be easily hand spun from 70 count wool at a commercial rate by a competent hand spinner.
These two references have been rattling around in my brain since I first started experimenting with "gansey needles" (and knitting sheaths). However, then, I was never able to knit such fabric at a reasonable pace. Now, that I have been using blunt gansey needles, such fabrics and objects have become more practical.
For example, when I first came across Jamiesons 2-ply Shetland Spindrift yarns (2,200 ypp), I was rather disdainful of the fabrics produced according to the gauge on the yarn band. However, when knit on 1.5 mm needles, the fabric is lovely. Gauge runs ~ 160 stitches per square inch. Not "weatherproof" mind you, but a warm, elastic fabric that is perfect for wearing in cool damp conditions. .Spindrift knit on 1.5 mm needles is warmer than worsted weight yarn (e.g., "4") knit on 5 mm or US 8 needles. The Paton's 4-ply Beehive was just a bit denser than the Spindrift with a slightly lower grist, and when knit on similar needles, produces a denser, warmer, and more durable fabric at 12 spi and 20 rpi,
These days I have taken to knitting yarns with grists of ~1,650 ypp/ 3.3 Nm (e.g. 3-ply or 6-ply sock yarns) on needles in the 1.75 mm range. This is finer than previous posts, and results in a gauge of 12 spi by 15 rpi. (As I said, I am falling down the Rabbit Hole and in the last few weeks, I have ground the sharp points off of 6 or 8 sets of fine, pointy "gansey needles"!) I use these fabrics for socks, mittens, and where ever a warm, light weight fabric is required. The more plies, the better the drape and elasticity of the fabric.
Then, 4-ply yarns in the 1,260 ypp range are knit on 2.0 mm needles. A month ago, I was knitting 1650 ypp yarns on 2 mm needles.
5-ply (gansey) yarns in the 1,000 ypp (sport weight) are still knit on 2.38 mm needles. It is a nice fabric. If I need a more weatherproof fabric, I reduce the ply twist to give more fill and knit on smaller needles. If I need a much warmer fabric, I use a lower grist yarn.
All of the above fabrics are firm, warm fabrics with good drape and excellent durability. For all of the above fabrics, I use long steel DPN with a knitting sheath. as described above, none of the fabrics are particularly weatherproof. Production rates on the finer needles are much better using blunt needles and working in the round. Purl stitches are easier on pointed needles. Pointed needles are required for picking up stitches. A fine crochet hook makes repair of mistakes easier. A cable needle is required for cable stitches.
So the question is,"Do I want an object that will be warm and stay looking beautiful for years and years, or do I want an object that will never be very warm, and will quickly fall apart?"
I work in yards per pound (ypp), because the math is easy. The square of the wpi (packed to refusal) is the grist in ypp, always. I know that when 10 hanks of 560 yards weigh a pound, I have spun 10s or 5,600 ypp, and it will measure 75 wpi. Then, if I make 5-ply, it will have a grist of 1,000 ypp and measure 32 wpi. I know that if I spin a single that measures 105 wpi, and I make 6-ply, then the resulting sock yarn will measure 40 wpi. I know that if I spin 40s that measure 150 wpi, and I ply it into a 6-ply yarn, it will have a grist of 3,360 ypp and measure 58 wpi.
Thus, I must update my gansey yarn chart.
(Note the differences with http://www.craftyarncouncil.com/weight.html , and https://en.wikipedia.org/wiki/Yarn_weight. Also note the failure of http://www.knitting-naturally.com/yarn-comparison-chart.html, http://www.spinderellas.com/Yarn%20Weights%20and%20Measures.pdf , and http://paternoster.orpheusweb.co.uk/lace/knittingyarns.htm , to use a wraps per inch technique that provides consistent and useful results.) The knitting community's to failure to "pack to refusal" when measuring wpi results in nonsense.
wpi grist (ypp) spin count notes
22 484 Aran Yarn (traditionally was 10-ply of 10 count singles)
24 1
26 676
28 840 Worsted Yarn (traditionally was 6-ply of 10 count singles)
30 900
32 1,000 Gansey Yarn ( 5-ply of 10 count singles)
33 1,100 DK weight yarns
34 1,120 2
38 1,443 Common grist for commercial sock yarns e.g., Wooly West
40 1,650 3 Various 3-ply and 6-strand yarns knit on 1.75 mm gansey needles.
42 1,800 Single cut woolen singles
44 1935 Fingering Yarn
48 2,303 Jumper Weight/ Spindrift weight 2-ply (1.5 mm needles)
50 2,520 4-ply Beehive yarn ( 20 count singles) (1.65 mm needles)
53 2,800 5
58 3,360 Traditional 6-ply sock yarn from 40 count singles
60 3,600 2-cut woolen singles @ 9 tpi
64 4,100 Modern lace weight
70 4,800 Woolen single at same tpi as 10s warp
75 5,600 10s Singles for warp/ 9-10 tpi ; woolen singles for weft @ 12 tpi
82 6,700 13 Traditional 3-ply Shetland lace plied up from 40 count singles
85 7,200 High-end Shetland lace weight yarn/ 2/14.5 Nm
105 11,200 20s Worsted singles that I use for my sock yarn @ 14 tpi
120 14,400 8- cut woolen singles / 18 tpi
130 16,800 30s Worsted singles @ 17 tpi
136 18,000 10-cut woolen singles / 20 tpi
142 20,200 2-ply from 80s e.g., ~2/40 Nm
150 22,400 40s Singles used for best sock yarn/ 17 -22 tpi /~ 45 Nm /Shirting
182 33,600 60s Traditional commercial "fines" / 22- 24 tpi
210 44,800 80s Traditional best commercial "fines" /24 - 27 tpi / 90 Nm
So, when I measure the wpi of 2/40 Nm yarn I get ~135 wpi which converts to ~ 18,000 ypp, which is about what I get when I simply convert from metric units. Wraps per inch works when one packs to refusal. For somebody to say a 2/40 Nm yarn measures 42 wpi is silly. If any of the sites referenced above had a competent spinner in residence, they would know this.
Note that 2/40 Nm can be easily hand spun from 70 count wool at a commercial rate by a competent hand spinner.
.jpg)