Wassit? Wassit? No clew on the Internet!

Some have been surprised not to find how to use a clew on the Internet.

They would not find much on wassit either. Wassit was the inexpensive, tightly spun, indigo dyed, knitting yarn that was ubiquitous on the shores of the English Channel 500 years ago. It was used for knitting everything from underwear and socks to ganseys for the fishermen. Why doesn’t something that important show up on the Internet?

A clew is simply a hook, hung from the belt, on which a ball of yarn is impaled. Many designs work. I simply bent a spiral of wire so that it clipped on to a leather work belt and held a wire claw (from the same root) upwards to hold my yarn.

Very likely some of the hooks on the lower end of knitting sheaths, that museum curators tell me were to hold the knitting, were actually clews to hold yarn. (Since the museums did not have needles for those sheaths, it is unlikely that the curators had actually tried knitting with such an arrangement.) However, as you knit round and round, hooks attached to the knitting get all tangled up. However, used as clews, the hooks hanging from the bottom of the knitting sheath work just fine. And, even when I am working on the second sleeve, I have not had a problem with the gansey touching the floor. So, I see no need or advantage from a hook to hold the knitting.

Clews work with either center-pull or outside in balls. Every so often you will have to reset the ball, and for center pull balls, rewind them, but it is knitting, not rocket science. They are useful if you are camping or knitting while walking or if your hut has a mud floor.

Get a clew!

Over on Ravelry, there is a discussion on centerpull vs. using yarn from the outside-in. The outside-in school talks about yarn barf and ball collapse resulting in tangle, while the center pull school talks up the virtues of the ball not rolling around.

I think it is a matter of yarn twist. Commercial balls of yarn have the correct twist when pulled from the center, regardless of yarn barf or final collapse and tangle issues. If you are winding your own balls, you should preserve the twist in the yarn. When you wind the ball, you should have a plan for whether you are going to use the ball from the inside or the outside. I always wind center pull.

Then, I suggest getting a clew to hold your yarn. I made mine out of a bit of steel wire. It holds either center pull or outside in balls of yarn at your waist, clean, handy, and out of (most) pets way. I think it is better than a pickel jar or even a ziplok bag with its corner cut off.

I can stand, or walk about while kntting. I can move away from my knitting bag without leaving a trail of yarn behind me. Sure I sometimes wind small balls and keep them in a cargo pocket, but the lets me pull a full sized ball right out of the stash and knit on the run.

Needle Case for Steel Needles - Advanced Technology

The flexible plastic risers used for irragation systems make good needle cases for steel needles as they are ligher and can be screwed together to accomodate any length of needls. Again the screw caps are protected with wads of waste yarn.

Come-on! Knit like a Man!

Some gansey yarn came in the other day, and I realized that I wanted to knit ganseys in public (KIP). I have long knitted socks and other small stuff in public, but gansey needles were akward to carry, so I did not take them out in public.

Now, I have knitting bag that lets me easily carry gansey projects:

It is a Craftman 20" tool bag - from the hardware store.

Then, I had to revist needle cases. I made a bunch of cloth needle rolls and needle bags for the last trip back East, but after living with them on the road for 3 weeks, I hated them.

The new program is a mix of bamboo cases (which are light) and sections of plastic pipe with screw caps (which are stong) and wads of waste yarn in the ends to protect the needles.

The gansey needle case very functional. It is two pieces of bamboo, smoothed and slotted, held to gether with a cord. Thus, it can protect the needles (and protect other things from the needles) even with knitting on the needles. The 12" steel needles are in a bamboo case made from a large piece of bamboo and a small piece of bamboo that is slotted to fit into the larger bamboo tube. I strengthen the ends of the bamboo with a bit of epoxy and stuff wads of waste yarn in for extra protection for needle points. Also note that less than fully dry bamboo WILL rust steel needles. DRY IT, Dry It, dry it.

Plastic pipe with screw-on caps protects more delicate needles. Again, the ends are stuffed with waste yarn.

As you can see, I have started a new gansey. My old Cornish Fish is just not up to the stress of a new gansey (even with its new dentures). Thus, this morning, I made another Cornish Fish. It took less than 45 minutes from start to finish. I took a piece of fire wood and split it into a blank. Then, I used a hand saw to cut it to lenth. I used an electric drill to drill a 3/32 hole in one end. I used my hand saw to cut the slot in the other end. Then I used my pocket knife to smooth it and carve the funnel at the needle hole that makes it easy to stick the needle in. I sanded it by hand and smeared some bee's wax finish on it. It is not beautiful. It is not a love token that I have lavished hundreds of hours on. A wood worker with power tools could have made it in 5 minutes. I might have finished it faster if the plums overhead had not been blooming so sweetly. It is a very practical knitting tool that will last for no more than 500 hours of knitting with gansey needles. It does feel good in the hand, and it feels good in the belt. It does not have any sharp edges.

It is about 6" long. Early-on, I had read that such small knitting sheaths must be for children. That was clearly written by somebody that had never made and used their own knitting sheaths. This size works very, very well. I think I will name it, "Albrecht," after the dwarf that forged the Ring from the Rhine gold.

A sock kit

Here is a photo of a pretty good sock kit that sat in the bottom of my sock project shoe boxes last fall. It is light, and does not take up as much space as gansy needles.

Using gansey needles for socks, mittens and sleeves

Here is an advanced technique for knitting sleeves, socks, mittens, and mobius cowels fast and tight. Is this how it really was done? Maybe not, but not many needles have survived and we do not know. This works, it is reasonable, fast, and -- well it takes some pratice, but it is worth it if you are knitting outdoor wear. This file is some 55 megabytes.

By the way, use steel sock needles. Wood needles do not like this technique.
Here is a close up of the finger motion. Note it is very similar to that of the standard gansey technique, but it requires a bit of finess so you do not pull the sock needle out of the socket.

When I get back out to California, I will reshoot all these segments (and few more), put them on a DVD and make the DVDs available.
A Natural Born Knitter with keen eyes has noted that the tips of the commercial steel needles were different. They are. I broke their polish by rubbing them with crocus cloth to make them a bit less slippery.
Some Knitting sheath will work with just about any double pointed knitting. Typically I use longer knitting sheaths with sock needles. Sheaths for gansey needles need to be stronger and made from harder materials than knitting sheaths for wooden, bone, or bamboo. The knitting sheath must fit the intended needles and suit the intended technique.

Edited in Jan 2013 to add, this was a work around.  Today, I swave such items using bent needles. Swaving is faster and easier.  Today, I am sure most gloves,  mittens and socks in the old days were swaved.  This is one case where I wondered down the wrong path.  It worked better than the hand knitting that I was taught, but there are better ways to produce such fabric and objects.

The Wrong Way to "De-pill" a Sweater

The orchard was pruned. Mom wanted ALL the clippings burned NOW. So, I did. However, twigs, even green twigs burn very hot. At the end of the day, I noticed that the flames had burned the pills and fuzz off of the sleeves of my gardening gansey. The wool protected my arms, and I never even noticed.

However, if I had been wearing a synthetic, my arms would have been toast.


I like wool.

Video of Gansey Needles with Knitting Sheath

Gansey needles are a very powerful if somewhat specialized knitting tool. However, gansey needles are the tool to knit a gansey without ruining your wrists.

Again, this is just a first try at a video clip. I will do this again and again until I get it right.

Again, my hands are all beat up from pruning all morning. Sorry no pretty models.

Here is a shorter clip showing finger and needle movements.

Video clip of A Better Way to Knit

Here at long last is my first VIDEO of knitting using a traditional knitting sheath with thin steel needles. It is a first cut, this is after all, a research journal. This is 85 megabyte, even at such low resolution.

A better view of the finger action is in the following clip:

Note that this was filmed during prunning season and the my hands are beat up from being out in the orchard.

This basic technique can be used for anything from socks, mittens, hats, and baby clothes to ganseys, rugs, and circus tents. It can be used for knitting in the round or back and forth. You can use more needles to knit larger items. This technique is appropriate for fine lace. and, I like a knitting sheath better than a knitting pouch/belt for Fair Isle.

Mamie Diggs Socks

Mamie Diggs is a historian in Williamsport, PA (where I have

been for the last few days.) I was sitting outside her classroom finishing a pair of new boot socks for myself. (My wife acquired the first pair of socks that I knit for myself in this pattern.) The first 3 socks of this pattern that I knit required only one skein each, however, the fourth one required a bit more, so I finished it with a bit of dark gray yarn of the same type that I had in my bag. So, this pair is mismatched from the start! I had just finished weaving in the loose ends when Mamie came out and started admiring the socks.

Mamie had learned knitting as a girl, but had been too much of a “tomboy,” to do much kitting. However, she did tell me about some of the knitting traditions she saw as a girl. Her Grandmother’s favored knitting needles were made of deer antler. They were quite long and were used with a knitting sheath. (Thus, apparently there was a tradition in Williamsport of using knitting sheaths as late as ~1900. ) She also told me of using a “circular needle” made of a single piece of cherry wood for knitting Afghans and bedspreads. With these wood circular needles, as the knitting progressed, the knitter would have two young girls hold and support the needle to prevent it from breaking under the weight of the knitting. I am working with the local historical society to find examples of these knitting tools.

Anyway to make a long story short, Mamie admired the socks to much that I just gave them to her. Thus, the second pair of these boot socks that I have made, that have become “house socks.” Mamie does not walk much anymore, so these socks should last her forever. Did you ever see someone smile so much just because you gave them a pair of socks?

I have ordered more yarn, and someday I will have a pair of socks in this pattern for myself.

Edited to note the Dr. Diggs died this last March, and is much missed.

Video clip of A Better Way to Knit

At long last! Video of using a knitting sheath! It is not Star Wars quality, but this is my first try at VIDEO.

Without any more fuss:



I whittled this knitting sheath with a chip knife, just as a sailor of old might have. The “z” twist rope pattern provides excellent support, and is one of my favorites. The needles, I made from steel rod from the local hardware store. A set of such needles can be made in a few minutes with the tools that most home owners would have in their workshops for a materials and supplies a cost of a couple of dollars per set. Very good needles are also available from J&S (http://www.shetland-wool-brokers.zetnet.co.uk/accs.htm) at a reasonable cost. (No connection)

Note also, the Fair Isle heel. Using a knitting sheath also makes knitting Fair Isle easy, but that video is for another day.

Sheep and Goats in the Backcountry

A couple of mountain goatthat I photographed in Montana a while back.

I "used-up" some commercial wool socks on that trip.

Hand knit socks are better.

Good Socks

I like pretty girls. I like pretty socks on a pretty girl. However, I also like to hike, ski, garden, and spend time out of doors. For that, I like socks that are comfortable. There are times when I want socks that will stand up to a good long walk (days). I like to take my pretty wife with me on those walks, and I tell you she is not as pretty if her feet hurt.
My wife and a Sherpa friend on a summit in Nepal at dawn. (You cannot tell how cold it was that morning. The other Sherpa were huddling, shivering, and cropped out of the photo.)

I see a lot of knitters selecting soft, and softer yarns to knit into socks. That is fine if all you want to do is sit around and look pretty. However, if they actually go walking in those socks, those soft luxuary yarns disintegrate into lint and holes. There is a certain functional beauty to a hiking sock (or ski sock) that keeps your feet comfortable so that you can think about the birds and the bees rather thinking about your feet and blisters.

As a boy, I was trained to wear two pair of socks in my boots. By the 1990s, I had settled on a polypropylene liner and a wool-pile boot sock. The sales clerks at the mountain sport shops assured me that was state of the art, but I was never happy with that combination. In the year 2000, I started knitting. Boot socks were an obvious early project. I tried the Briggs and Little yarns. I tried Lopi with more success. The results were good, but not perfect. For example, my wife told me some of the Lopi socks were too scratchy. All in all, last fall, I found myself short of boot socks and determined to knit myself some really good ones. First, how thick? With good wool socks, does one need a liner sock? Results from some of the Lopi yarns convinced me that a good, hand knit wool sock did not need a liner or an outer sock. One good sock was all that was needed. I swatched a bunch of yarns. I Knit one sock of one yarn and another sock of another yarn, put them on and walked up mud ridge and back (15 miles). Then, I looked at the condition of my feet, and the condition of the socks. The soft yarns fell apart. That resulted in blisters. Many of the sock yarns with nylon in them were not much better.

What I ended up liking was MacAusland's 2-ply med yarn for winter socks and 2 ply fine for spring and fall socks. MacAusland's Woolen Mill on Price Edward Island (http://www.peisland.com/wool/ ) is a funky old mill with equipment still powered by leather belts running across the ceiling. The yarn is sold in skeins and it retains a stinky spinning oil. I discovered it by talking to a hooked rug maker on Cape Breton Island. (Yes, she uses it as "rug wool"!) I made a detour to find MacAusland's. It was worth the effort. If you buy from the mill or mail order, you will need to wash the yarn before you knit with it. It is worth the effort. The yarn is not expensive, and for some things, it is the best yarn that I have knit. It comes from real sheep, and it has real veggy matter in it. It is still worth the effort. I have no association with MacAusland.

I ended up developing two patterns, both based on the Dad's Function over Form socks at http://knitting.about.com/library/ndadsocks.htm; except that to get them as tight as I wanted them, I knit them on I had to use #3 steel needles - with sharp points for the med yarn and #1 needles for the fine. The gussets were picked up and the first 2 rows of gusset stitches were knit on # 1 steel needles. I hate holes in my gussets.

Here is what I think good boot socks should look like, tried, washed, and dried. The clerks at the mountain sports shops do not have really good boot socks to sell. I know they like to hike, and I know their feet will not be as comfortable as mine.
The natural color yarn is somewhat softer than the dyed yarns. The yarn gains softness when it is well washed and rinsed in a conditioner. The fabric is firm, but not unpleasantly so. Knitting large and felting down always produced fabric that was too stiff for my comfort. The hiking and gardening sock has a Fair Isle heel to protect my heel from the stiff counter in my hiking and gardening boots and ribbing to the toe for extra ventilation. The ski sock does not have the ribbing for firmer control. I will post a pattern on ravelry real soon now.

Below is the tool set used to produce these socks.
This Flemish style knitting sheath was worn at my right elbow, tucked into a heavy leather belt. The z twist of the pattern, provides extra stability for firm knitting. Yes, z twist is better than s twist in this case. It is not possible to knit this tight without a knitting sheath. And, the firmness of the knitting really improves the quality of the socks. After this project, I have greater respect for this little tool kit.
The red stitch marker was cut from a plastic straw.

My wife in her new hiking socks this afternoon. She liked them so much that she aquired the hiking socks that I had just knit for myself. Oh well! There is more yarn where that came from!

(I have no relationship with MacAusland's, except that I bought some of their yarn.)

More basics

This is the mouth of my poor old Cornish fish (a knitting sheath that is strong enough to support long steel needles). It had worn until it was oval, and been re-enforced with different glues and epoxy. This morning it got a brass insert. We will see if that helps.


When I started learning about knitting sheaths, I was told that I would need curved gansey needles, which were no longer available. In fact the straight needles gansey needles work just best, but they aquire a curve as they are used over a period of hundreds of hours. Then, I pound them straight again and go back to my knitting. Curved needles were used with knitting sheaths for knitting miniatures, but that is an altogether different technique.

If you see a knitting sheath with brass insert (or a metal knitting sheath or knitting heart) then I know from sad past experience that it was used with metal needles. A knitting sheath with a metal mouth destroys wooden knitting needles.


One can knit socks without a knitting sheath. I could even knit hats, hoods, and scarves without my Goose Wing knitting sheath. I would knit slower, and there would be more stress on the hands and wrists, but I could do it. (Actually, I can make another knitting sheath in an hour with just my pocket knife and a candle.)

Real ganseys are another matter. Real. wind -proof ganseys (sailor's frocks) are another matter altogether. I cannot knit that tight, long enough to finish a gansey without a knitting sheath. Here I am testing the new "brass dentures" of my Cornish Fish, using 18" long US #1 double pointed steel gansey needles. The fish is tucked into my pants waist band over my right hip and the working needle is flexed forward under my right arm.


This is just back and forth swatching rather than real "in the round" knitting.

I am still amazed at how a knitting sheath tames these long needles. Such long needles are unmanageable without a knitting sheath. These gansey needles are even too long to use with a knitting pouch.

However, once you understand the technique, they make knitting a gansey ever so much easier and faster.




Another view showing how the yarn is held in my right hand. It is possible to knit "continental" style using a knitting sheath. Knitting continental style, one can knit even faster, but the fabric is significantly looser, and purling is more difficult.
Since my focus is on warm fabrics, I like to knit tightly, and I like stitches that add texture. Therefore, I usually hold the yarn in my right hand. Still, I knit fairly fast, and I can knit for exteded periods of time without much stress on my hands and wrists.

Back to basics

Here, I am knitting a sock with sock needles and a nice little knitting sheath made out of a Brittany Birch crochet hook.

This little system is light, inexpensive, and is the fast way to knit socks. The knitting sheath allows Me to knit faster than I can knit without it. For Fair Isle and standed knitting I can knit a whole lot faster. Your results may vary.













This is another view of the the knitting sheath shown above. I refer to this style of knitting sheath as "Flemish".












This is a classic "goose wing" shaped knitting sheath that I made from piece of oak. This style was common in Yorkshire. For scale it is shown with 10" long, #3 needles.












This it the goose wing knitting sheath in use. Note the differece in position between this the "Flemish" design in use with the sock needles above. Some Flemish designes work very in this position. Some do not. The most beautiful knitting sheath that I ever carved is Flemish style. It works well with sock needles, but falls out when I try to tuck it at my side in this position. It is just too polished. I was trying too hard to to avoid the "old wooden spoon" look.





Here is a "Cornish fish" style of knitting sheath. This one is carved of California Black Walnut, and is one of the best knitting sheaths I have ever produced. Unfortunatly, it is about worn out and will be tossed in the fire soon.

It is as ugly as an old wooden spoon, but it has served me well.

Funky

For hundreds of years, most knitters made their own knitting sheaths. Many must have been "funky.” Certainly, we have examples of sailors scrimshaw and sailor carved knitting sheaths that were real art. These became sentimental keepsakes. However, knitting sheaths as tools wore out in a couple of thousand hours, the knitter made themselves another and they tossed the old one into the fire.

Knitting sheaths were tools that wore out. They carved themselves a knitting sheath that was the right size and shape, and had a nice feel, but it was just a tool that would be tossed in the fire in 6 months.

As I started making knitting sheaths, I was looking for, “What would work?” “What was the right size?” I make a bunch of rather “funky” knitting sheaths. Many did not work very well. Some of them worked. Some of them worked very well. One of the very best is in the photo.

It was on the kitchen table this morning. My wife said, “That looks funky!” Nobody would want it. She did admit that it had a lovely feel to it in the hand.

It was carved from California Black Walnut, and it does have a nice feel to it. It feels good in the hand, it feels good in the belt, and it works very well. It is not pretty, but it works very well and it is a pleasure to use. It only cost me a few minutes whittling to make, and when it wears out, I will toss it in the fire. It is not a pretty keepsake, but it is a good functional tool.

Knitting Pouches

Toward the end of last year, I purchased a knitting pouch from Jamieson & Smith Shetland Wool Brokers Ltd (http://www.shetland-wool-brokers.zetnet.co.uk/accs.htm). It is now part of my regular knitting stash and I use it regularly.

Why? Because it is my new toy. I tried it with short sock needles. A knitting pouch actually increases the knitting effort with short needles. If you are going to use a knitting pouch, use 30 or 40 cm long DPN. Short needles and a knitting sheaths that supports the needles up into an ergonomic work zone are better for socks, mittens, and gloves.

Where the pouch really stands out is for Fair Isle and Scandinavian stranding on hats and children’s clothes done on rather long DPN in the US # 2 ->3 range (2.5- 3.5 mm) For this kind of knitting, a pouch provides good support and control. Until you have tried it, you would not believe how easy a knitting pouch makes two color knitting. Holding a yarn in each hand turns out not to be so hard when you have the right tools.

I have a gansey for my wife out of Cool Wool 2000 on 10 “, #3 Brittany DPN. That really should be the perfect use for the knitting pouch. I have not decided if I like the pouch for that knitting yet or not.

Real Ganseys are Real Warm

This project of knitting a gansey was started because I wondered how did the fishermen of old, stay warm? The hand knit "fisherman's sweaters" that I knew, simply were not warm enough to keep a fisherman warm on an extended fishing trip.

Thus, I have knit a traditional fisherman's gansey. Is it warm enought to keep a fisherman warm on an extended fishing trip? That would presume extended exposure to temperatures in the 30F to 50F range with winds of greater than 15 mph. I live in California, so skiing would a beginnning test. The air temperature was about right, and I could ski fast to simulate wind.



I wore my "Cornish gansey" for two days of skiing at Sierria Tahoe and Kirkwood. The air temperature was 30F to 50F, the slopes were not crowded, so we were able to ski fast to generate real, sustained wind effects.

The results were very surprising. The garment is perhaps the single best ski garment that I have ever worn. It was warm enough to keep me warm during fast runs early in the morning or in the afternoon shade. It was warm enough that I could wear it while skiing in shorts, while my companions were wearing long ski pants, long underwear, and ski parkas. On the other hand, it was cool enought that I could wear it on the sun deck or indoors. (With jeans, it is comfortable up to about 62F.) Thus, I was first in the beer line as my companions took off their ski gear, and I was first in the lift line as my companions geared up. I can imagine the virtues of sleeping in such a garment when all hands are called on deck to shorten sail.

Since this was a test, I wore the gansey with a variety of other garments including at least two different under garmnents. You can just see the blue collar of a shirt that I wear when running in cold weather sticking up from under the gansey in the picture where I am wearing shorts. However, the gansey proved to be more versital worn by itself, as shown in the picture where I am wearing the black ski pants.

This gansey has loose cuffs and collar. I fully expected that in the event of a fall, snow would get under the gansey. This did not happen. In fact, I took a good fall on the ice on upper
Zachary and expeced to slide all the way down to Home Run, but did not as a result of the greater friction between wool and ice as compared to the friction between nylon and ice. In any case, we skiied pretty much all of the double black dimond runs at Kirkwood, and there was no problem with snow getting into the gansey. The open slope above and behind me as I am seated is the "Wall" and a good example of what we skiied that day. >>Yes, we started above the cornice.

This was the first time that I had ever been perfectly, comfortably, warm skiing in a hand knit sweater. The great downside to this gansey is that it has no pockets. This convinces me that the purpose of the elaborate fishermen's sweaters was to keep the fishermen warm. The decorative stitch patterns provide additional warmth. The tight knitting provided wind proofing and warmth. The loose cuffs and collar provide ventilation as required.

This summer, this gansey will get a real test off the coast of Novia Scotia. I have no fear about it passing test.

This gansey was knit from Lion Brand fisherman's wool on 2.25 mm gansey needles yielding more than 8 stitches per inch. The stitch patten is Lizard Lattice. It was knit in round up to the armholes, then the front and back were knit separately and joined at the shoulder. The neck stitches were picked up and neck knit, then the shoulder stitches were picked up and each sleeve knit.

This is very different paradigm of constructing a warm garment.

Bottom line, if you want warm, knit tight.

Post Script
The success of the first test inspired a second test. A while back, I knit a fishing sweater for myself, so when a cold rain storm came through the area yesterday, I spent an hour walking around in the rain in that sweater. I was warm and toasty, and I stayed dry. Then, I put on a favorite, commercial "fisherman's" sweater that my wife had bought for me in New Brunswick, and which I had used as a standard of knitting excellence for several years. in the New Brunswick sweater, I started out into the rain again. I could feel every drop against my skin, I was wet in minutes. I was cold in 15 minutes. I put the sweater that I knit back on, and in minutes I was warm and dry again. Both sweaters had been washed in the same wool wash with lanolin in it, so they were similarly oiled. Both are knit at 5 spi. What is the difference? The yarn I used was about 25% heavier, thus was more tightly knit. However, because of shorter sleeves and less ease, the sweater I knit weighs 600 g compared to the 800 grams that the commercial sweater weighs. Thus, a lighter, but tighter knit sweater is much warmer.

Cornish Fisherman's Gansey

New years Day, I cast on for a Cornish Fisherman's Gansey as described by Mary Wright in book. This gansey was pattern was selected because swatch testing indicated that the "Lizard Lattice" was the warmest stitch pattern, and it was a common stitch pattern for contract knit fishermen's ganseys.

My Cornish Gansey was finished last week. It is shown here modeled by my climbing buddy, Bob Williams.

Of course, it was filthy after some 130 hours of knitting and frogging. It was knit on steel needles. Half way through, I gave the needles I was working with away, and the replacement needles that I pulled out of the stash had to be polished. I guess I did not get those needles real clean after polishing, and that contributed to the filth on the sweater. Anyway it needed a full wash before blocking.

The gansey is quantitatively different from any other garment that I have ever worn. It is a very clever design. It is comfortable in a temperature range between 40 F and 60F. At higher temperatures, or when I am more active it automatically vents and remains comfortable. It is basically windproof up to about 20 knots. At 990 g it is twice as heavy as most of my medium weight synthetic technical pull overs and in the weight class of my heavier multilayer garments which run about 770 g. I have scheduled a head to head test in the snow.

The body of the gansey was knit using traditional steel gansey needles. These needles are 18 inches long and are 2.3 mm in diameter (US size 1). Five needles are used in the knitting. Below is a photograph of me knitting 16 inch needles, showing how the held and flexed during use. with longer needles, the knitting sheath is slid a couple of inches back on the belt.

Knitting sheaths

The gansey in Fisherman's Wool is at some 40,000 stitches. Considering that a typical fisherman's sweater knit with worsted weight at 4.5 spi is only 25,000 stitches, mine is getting along. Considering that this garment will have more than 150,000 stitches in it when it is finished, I've got a ways to go.

But, I am going up the leaning curve on knitting sticks. I have made a dozen prototypes so far, some of which are quite effective. That is what this note is about.

I saw pictures of continental style knitting sheaths or sticks, so that is what I started making. I did not like them.

Then I saw http://www.daelnet.co.uk/features/knitting/ksticks.htm and I started working along those lines. I find these shapes more comfortable and more effective. Here are two views of four knitting sheaths that I have made along these lines. The light colored wood is hickory, and the darker wood is red oak. The oak is more of the classic shape. That classic shape is really a good design. With an over all length of 6 3/4 inches, it has enough leverage to stabilized long gansey needles, but it fits comfortably under your belt, and does not poke holes in your easy chair. Turned upside down, it tucks nicely into apron strings.




These are two views of the same needles. The needls are polished steel and their dark color is artifact of the camera flash. Note that 3 of the sheaths have "notches" that catch on a belt loop on my jeans which gives the knitting sheath extra stability without additional length or bulk. The extra stability is useful with long, heavy (2mm) needles, but is really not needed with 1.5 mm and smaller needles.



This is another photo of one of the knitting sheaths shown above with 5 - 11 inch 1.5 mm steel needles. The 2 horizontal needles show their true polished steel color. The yarn in this photo is Bartlett's sport and the guage comes to about 10 spi, which you will find to be warmer than worsted weight yarn knit at 4.5 spi.

So, what does 40 K stitches look like? Here is a shot of my favorite knitting sheath with the gansey in progress.